Analog:
10 MHz: OS-45010
20 MHz: | OS-45020 |
25 MHz: | OS-22250 | OS-22251 |
40 MHz: | OS-22400 | OS-22405 | OS-45040 |
60 MHz: | OS-22600 | OS-22605 |
100 MHz: | OS-221000 | OS-221005 |
Digital:
25~200 MHz: DSO-55XXXC series
20 MHz: DSO-3200C
150 MHz: DSO-51150C
250 MHz: DSO-51250C
Probes:
Oscilloscope Probes
Specifications:
| CRT | |
| Type | 3" round |
| Display area | 8 x 10DIV (1DIV = 6mm) |
| Potential | 1.3kV |
| Lighting color | Green |
| VERTICAL SYSTEM | |
| Sensitivity | 5mV/DIV ~ 5V/DIV +/- 3% |
| Width of band(-3dB) | DC:0 ~ 10MHz AC:10Hz ~ 10MHz |
| Input impedance | 1MW +/- 3% 30pF +/- 5pF |
| Input coupling | DC, GND, AC |
| Max. input voltage | 400V (DC + AC peak) |
| Trimming ratio | 2.5:1 |
| HORIZONTAL SYSTEM | |
| Sweep time | 0.1s/DIV ~ 0.1ms/DIV +/- 3% |
| Trimming ratio | 2.5:1 |
| TRIGGER SYSTEM | |
| Mode | AUTO, NORM, TV |
| Source | INT, LINE, EXT |
| Polarity | Positive or negative |
| Trigger sensitivity | INT: 1DIV, EXT: 0.3V, TV: 2DIV |
| External triggering signal input |
Input impedance:1MW +/- 3% 25pF +/- 5pF |
| X-Y OPERATION | |
| Defection factor | X: 0.5V/DIV +/-5pF |
| Width of band(-3dB) | DC: 0-1MHz AC: 10Hz-1MHz |
| Phase error | < 3(DC ~ 50kHz) |
| CALIBRATION | |
| Source | 1kHz +/- 2%, 0.5Vp-p +/- 2% Square wave |
| POWER SOURCE | |
| Voltage | 110 ~ 127VAC +/- 10%, 220 ~ 240VAC +/- 10% |
| Frequency | 50Hz +/- 2Hz, 60Hz +/- 2Hz |
| Max consumption | 25W |
| DIMENSION & WEIGHT | |
| Weight | 3Kg |
| Dimensions | 220 x 90 x 270mm |
| OTHER | |
| Accessories | One operation manual, one fuse, one power cable, two probes |
 |
 |