Oscilloscope, 100 MHz, OS-221005

Analog: 10 MHz: OS-45010 20 MHz: \| OS-45020 \| 25 MHz: \| OS-22250 \| OS-22251 \| 40 MHz: \| OS-22400 \| OS-22405 \| OS-45040 \| 60 MHz: \| OS-22600 \| OS-22605 \| 100 MHz: \| OS-221000 \| OS-221005 \|	Digital: 20 MHz: DSO-3200C 40 MHz: DSO-55040B 60 MHz: DSO-55060B/ DSO-55060C 100 MHZ: DSO-55100B/ DSO-55100C 150 MHz: DSO-51150/ DSO-51150C 250 MHz: DSO-51250/ DSO-51250C

Oscilloscope (100 MHz): OS-221005

$1,195.00

Features:

1mV/Div sensitivity

2nS/Div Sweep Rate

110/125/220/240 V Power Source

X-Y operation, Z Modulation input, Y-Output

Relay Sweep

Two Sweep Mix Function

CRT

Type:	6" diagonal, rectangular screen with integral graticule
Display Area:	8 x 10 div (1 div = 1 cm)
Accelerating Voltage:	14 kV
Phosphor:	P31

Vertical Deflection

Bandwidth	DC-100MHz (-3db)
Sensitivity:	1 mV/div to 1 V/div (25MHz, -3db), x 5 gain selected. 5 mV/ div-5V/ div
Attenuator	1-2-5 sequence, 10 step with variable control
Input Impedance	1MW + 2%, 25 pF + 10pF
Max. Input Voltage	400V (DC + AC peak)
Rise Time:	5 mV/div - 5V/div: 3.5 nS
Rise Time:	1 mV/div: 14nS
Over Shoot	Less than + 5%
Operation Mode	CH1, CH2, DUAL
Algebraic Addition	CH1 + CH2, CH1-CH2
Inverter	CH2 only

Horizontal Deflection

X-Y Mode:	Switch selectable using X-Y switch,
X-Y Mode:	CH1: X axis, CH2: Y axis
Accuracy:	Y-Axis: ±3 %, X-Axis: ±6%
Bandwidth	DC - 1MHz (-3db)
X-Y Phase Difference:	Approximately 3° at 50 kHz

Sweep System

Sweep Speed:	Main, Mix, Delay

Holdoff:	5:1 continuously variable (0.1ms/DIV)

Main Sweep

Sweep Speed	20nS/ div ~ 0.5S/ div in 1-2-5 sequence, 23 steps
Accuracy	+ /- 3%
Sweep Magnification	10X, + /- 10 % extend sweep speed up to 2 Ns/div
Variable Time Control	5 : 1 uncalibrated, continuously variable between steps

Delay Sweep

Sweep Speed	20 Ns/ div~ 0.5S/ div in 1-2-5 sequence, 23 steps
Accuracy	+ /- 3%
Sweep Magnification	10X, + /- 10 % extend sweep speed up to 2nS/ div
Delay Time Position	Variable control to locate desirable waveform for extending.

Triggering

Trigger Coupling	AC, TV-V(DC), TV-H, LINE
Trigger Source:	CH1, CH2, ALT, EXT
Slope	+ /-

Trigger Sensitivity

Coupling	Bandwidth	INT	EXT
TV-V (DC)	DC - 1kHz	0.1 DIV	0.1 Vp-p
TV-H	1kHz -100Khz	0.1 DIV	0.1 Vp-p
AUTO	100Hz - 100MHz	2.1 DIV	0.1 Vp-p
NORM	100Hz - 100MHz	2.1 DIV	0.1 Vp-p

CH2 Output

Output Level	100 mV/ div (no load)
Output Level	50 mV/ div (with 50W load)
Bandwidth	20 Hz - 20MHz (-3 db)
Calibrator	Square wave 1KHz + 10%, 0.5Vp-p + 3%
Z-Modulation	Positive TTL signal, low level blank intensity at any intensity, high level unblank any intensity
Trace Rotation	Adjustment on front panel
Power Source	110V, 125V, 220V, 240VAC + 10%, 50/60 Hz
Power Consumption	Approx. 60 Watts
Dimensions	324(W) x 398(D) x 132(H) mm
Net Weight	Approx. 8.5 kg
Rated Range of Use	10°C ~ 35°C, 10-80% R.H.
Limits of Operation	0°C ~ 50°C, 10-80% R.H.
Storage Environment	-30°C ~ 70°C, 10-90% R.H.

© Copyright 1995~2009 Sun Equipment Corporation. All rights reserved Prices and specs are subject to change without notice.

Order 1-800-870-1955