| Analog: 10 MHz: OS-45010 20 MHz: | OS-45020 | 25 MHz: | OS-22250 | OS-22251 | 40 MHz: | OS-22400 | OS-22405 | OS-45040 | 60 MHz: | OS-22600 | OS-22605 | 100 MHz: | OS-221000 | OS-221005 | |
Digital: 20 MHz: DSO-3200C 40 MHz: DSO-55040B 60 MHz: DSO-55060B/ DSO-55060C 100 MHZ: DSO-55100B/ DSO-55100C 150 MHz: DSO-51150/ DSO-51150C 250 MHz: DSO-51250/ DSO-51250C |
| Oscilloscope (40 MHz): OS-45040 | $595.00 |
| CRT | |
| Type | 6" rectangle, internal graticule |
| Display area | 8 x 10DIV (1DIV = 10mm) |
| Accelerating voltage | 12KV |
| Brightness and focusing | Controlled at the front panel |
| Trace rotation | Adjusted at the front panel |
| VERTICAL SYSTEM | |
| Sensitivity and accuracy | 5mV ~ 20V/DIV,
+/- 3% 1mV/DIV ~ 1V/DIV, +/- 5% (5 times, only CH1) 12 calibration steps in order of 1-2-5 |
| Width of band(-3dB) | DC(AC 10Hz) ~ 40MHz |
| Rise time | <8.75ns |
| Input impedance | 1MW +/- 3% 30pF +/- 5pF |
| Input coupling | DC, GND, AC |
| Max. input voltage | 400V (DC + ACpeak) |
| Vertical mode | CH1, CH2, DUAL (CHOP, ALT) ADD,CH2 inverse |
| CH1 signal output | 25mV/DIV 50W¸ 20Hz ~ 10MHz(-3dB) |
| HORIZONTAL SYSTEM | |
| Time factor | 0.2ms
~ 0.2s/DIV, 19 steps in an order of 1-2-5 Multiplication factor 10 times (Max.Sweep speed 20ns/DIV) |
| Accuracy | +/- 3%, +/- 5% (10 times) |
| TRIGGER SYSTEM | |
| Mode | AUTO, NORM, TV-V, TV-H |
| Source | VERT (DUAL, ALT), CH1, EXT, LINE |
| Coupling | AC |
| Polarity | Positive or negative |
| External triggering signal input | Input impedance:1MW
~ +/- 3% 25pF
+/- 5pF Max. Input Voltage: 400V |
| Sensitivity internal (External) | 20Hz ~ 2MHz: 0.5DIV
(0.2Vp-p) 2MHz ~ 20MHz:1.5DIV (0.8Vp-p) TV: 1.0DIV (1VP-p) 20MHz ~ 40MHz: 1.5DIV (0.8Vp-p) |
| X-Y OPERATION | |
| Input | Axis X: CH1 input signal Axis Y: CH2 input signal |
| Width of band(-3dB) | Axis X: DC ~ 1MHz |
| Phase error | <3 (DC ~ 50kHz) |
| AXIS Z | |
| Input impedance | 20KW ~ 30KW |
| Input signal | 5Vp-p (Negative signal highlighted) |
| Width of band | DC-2MHz |
| Max.input voltage | 30V (DC + AC peak) |
| CALIBRATION | |
| Source | 1kHz 0.5Vp-p Square wave |
| POWER SOURCE | |
| Voltage | 110 ~ 127 VAC +/- 10%, 220 ~ 240VAC +/- 10% |
| Frequency | 50Hz +/- 2Hz, 60Hz +/- 2Hz |
| Max consumption | 45W |
| DIMENSION & WEIGHT | |
| Weight | 7.8Kg |
| Dimensions | 316 x 132 x 410mm |
| OTHER | |
| Accessories | One operation manual, one fuse, one power cable, two probes |
 |
 |
© Copyright 1995~2009 Sun Equipment Corporation. All rights reserved Prices and specs are subject to change without notice.
|
Order
1-800-870-1955
|