|
|
|
20 MHz FEATURES
|
| SPECIFICATIONS | ||
|
CRT |
Type |
6-inch rectangular type with internal graticule 8 x 10 DIV (1 DIV=1 cm) |
| Z-axis input | Input Impedance : Approx. 5k£[ | |
| Sensitivity : Above 3Vp-p | ||
| Bandwidth : DC ~ 5MHz | ||
|
|
||
|
VERTICAL SYSTEM |
Sensitivity | 5mV ~ 5V / DIV +3%, 1mV ~ 2mV / DIV +5% |
| Bandwidth | DC ~ 20MHz | |
| DC ~ 10MHz at 1 ~ 2mV / DIV | ||
| Rise Time | 17.5nS (35nS at 1mV ~ 2mV / DIV) | |
| Input Impedance | Approx. 1M£[ | |
| Input Coupling | AC, DC, GND | |
| Vertical mode | CH1,
CH2, DUAL, ADD, CH2 INV (Dual automatic switching ALT and CHOP) |
|
|
|
||
|
HORIZONTAL SYSTEM |
Sweep Time | 0.1µS
~ 0.5S / DIV+3%¡F 100nS ~ 50mS / DIV+5% (x 10MAG)¡F 10nS ~ 50nS+8% (x 10MAG) |
|
|
||
|
TRIGGER |
Trigger Mode | AUTO, NORM |
| Trigger Source | CH1, CH2, ALT, LINE, EXT | |
| Trigger Coupling | AC, DC, HF, REJ, TV | |
| Trigger Slope | "+" or "-" | |
|
|
||
|
X-Y OPERATION |
Sensitivity | 5mV ~ 5V / DIV+4% |
| X-axis Bandwidth | DC ~ 1MHz | |
| Phase Error | 3º or less from DC ~ 50kHz | |
|
|
||
|
OUTPUT SIGNAL |
Trigger Signal Output | Voltage : approx. 50mV / DIV into 50£[ |
| Calibrator Output | 1kHz Squarewave, 2Vpp+2% | |
|
|
||
| POWER SOURCE | AC 100V / 120V/220V / 230V + 10%, 50 / 60Hz | |
|
|
||
| ACCESSORIES | Power
cord x 1 ; Instruction manual x 1 ; Probes(10:1/1:1) x 2 |
|
|
|
||
| DIMENSIONS & WEIGHT | 310(W) x 150(H) x 455(D) mm¡FApprox. 8.2kg | |