CRT
| Type: | Rectangular with integral graticule |
| Display Area: | 8 x 10 div (1 div = 1 cm) |
| Accelerating Voltage: | 12kV |
| Phosphor: | P31 |
Vertical Amplifiers ( CH1 and CH2)
| Sensitivity: | 5 mV/div to 5 V/div (X1 mode) |
| 1mV/div to 1V/div (X5 mode) | |
| 1-2-5 sequence, 10 step attenuator. Vernier control provides fully adjustable attenuation between steps. | |
| Accuracy: |
+3% (X1 mode) |
| +5% (X5 mode) | |
| Input Impedence: | 1MW + 1% // 25pF + 10pF |
| Frequency Response: | 5 mV to 5 V/div (CAL): DC to 60 MHz (-3 dB) |
| 1 mV/div (CAL): DC to 20 MHz (-3 dB) | |
| Rise Time: | Approximately 5.8 ns |
| Operating Modes: | CH1: CH1 single trace |
| CH2: CH2 single trace | |
| ALT: dual trace, alternating | |
| CHOP: dual trace, chopped | |
| ADD: algebraic sum of CH1 + CH2 | |
| Polarity Reversal (Invert): | CH2 only |
| Maximum Input Voltage: | 400V dc + ac peak |
| Maximum Undistorted Amplitude: | DC-to-60MHz: 4 divisions |
| DC-to-30MHz: 8 divisions |
Horizontal Amplifier (CH1)
| X-Y Mode: | Switch selectable using X-Y switch, |
| CH1: X Axis, Ch2: Y-axis | |
| Sensitivity: | Same as vertical channel 2 |
| Accuracy: | Y-Axis: |
© Copyright 2000-2012 Sun Equipment Corporation. Prices and specifications are subject to change without notice