DSO-01100:Digital Storage Oscilloscope (100 MHz),
FEATURES:
SPECIFICATIONS:
Vertical System:
| Sensitivity | 1mV/div ~ 1V/div (+ 3%) at x5 gain selected |
| 5mV/div ~ 5V/div (+ 3%) at normal, | |
| 10 steps in 1-2-5 sequence, continuously variable between V/div steps | |
| Bandwidth | DC ~ 100 MHz (-3dB) at Normal |
| DC ~ 25 MHz (-3dB) when x5 gain selected | |
| Rise Time | Approx. 3.5ns |
| Input Impedance | 1MW + 2%pF + 10pF |
| Max. Input Voltage | 400V (DC+AC peak) |
| Operating Modes | CH1, CH2, Dual, (ALT, CHOP), CH1, CH2 (invert) |
Horizontal System
| Sweep Time | 0.2 us/div 50ms/div at x10 Mag, 20 us/div ~0.5s/div (+3%) 23 steps in 1-2-5 sequence , continuously variable between s/div steps |
| Sweep Mode | X-Y |
| Hold Off Time | 5:1, continuously variable (0.1us/div) |
| Trigger Source | CH1, CH2, Line, EXT |
| Trigger Mode | AC, TV-V (DC), TV-H, Line |
| Trigger Sensitivity | Internal: 0.5div |
| External: 500mv | |
| Trigger Slope | "+" or "-" |
X-Y Operation
| Sensitivity | same as the vertical system |
| Accuracy | Y-Axis +3%, X-Axis +6% |
| Bandwidth | DC ~ 1MHz (-3dB) |
| Phase Difference | Approx. 3° at 50KHz |
CRT
| Type | Rectangular with internal graticule |
| Display Area | 8 x 10 div (1 div = 1 cm) |
| Accelerating Voltage | 14 KV |
| Control | intensity, Focus, Trace Rotation |
Others
| Calibrator | Square Wave 1KHz (normal), 0.5Vp-p (+ 3%) |
| Power Requirement | 110/ 220VAC + 10%, 50/60Hz Approx. 40W |
| Accessories | Probes x 2, instruction Manual, Power Card |
| Dimensions | 324 x 132 x 398 mm |
| Weight | 8.5 Kgs |
 |
 |
© Copyright 1995~2009 Sun Equipment Corporation. All rights reserved Prices and specs are subject to change without notice.
|
Order
1-800-870-1955
|
© Copyright 2000-2012 Sun Equipment Corporation. Prices and specifications are subject to change without notice