|
|
FEATURES
|
| SPECIFICATIONS | |
| Main | |
| Frequency Range | 0.1Hz ~ 10MHz (8 ranges) |
| Amplitude | >10Vp-p (into 50£[ load) |
| Impedance | 50£[+10% |
| Attenuator | -20dB+1dB x 2 |
| DC Offset | <-5V ~ >5V( into 50£[ load) |
| Duty Control | 15% : 85% : 15% to 1MHz Continue variable (square wave only) |
| Display | 6 digits LED display |
|
|
|
| Sine Wave | |
| Distortion | 1% typical |
| Flatness | + 0.45dB (+5%) |
|
|
|
| Triangle Wave | |
| Linear | >98% to 100kHz |
|
|
|
| Square Wave | |
| Symmetry | +2%, 1Hz ~ 100kHz |
| Rise or Fall Time | < 35nS |
|
|
|
| CMOS Output | |
| Max. Frequency | 2MHz |
| Level | <4Vpp ~ 14.5Vpp+0.5Vpp adjustable |
| Rise or Fall Time | <120nS |
|
|
|
| TTL Output | |
| Level | >3Vpp |
| Rise or Fall Time | <20nS |
|
|
|
| VCF | |
| Input Voltage | 0V~10V ¡Ó 1V(100 : 1) |
| Input Impedance | 10k£[ ¡Ó10% |
|
|
|
| Sweep Operation | |
| Sweep/Manual | Switch selector |
| Sweep/Rate | >100 : 1 ratio max. and adjustable |
| Sweep/Time | 0.5sec. ~ 30sec. adjustable |
| Sweep/Mode | Lin./Log. switch selector |
| Sweep/Out | 0V ~ 10+1V |
|
|
|
| Frequency Counter | |
| INT./EXT. | Switch selector |
| Range | 0.1Hz ~ 10MHz (5Hz ~ 150MHz EXT.) |
| Accuracy | Timebase accuracy ¡Ó1 count |
| Timebase | ¡Ó20ppm (23¢XC¡Ó5¢XC) after 30 minutes warm up |
| Resolution | The maximum resolution is 100nHz for 1Hz and 1Hz for 100MHz |
| Input Impedance | 1M£[//150pF |
|
|
|
| Power Source | AC 115V/230V¡Ó15%, 50/60Hz |
|
|
|
| Accessories | Power
cord ¡Ñ 1, Instruction manual ¡Ñ 1, GTL-101 ¡Ñ 2 |
|
|
|
| Dimensions & Weight | 251(W) ¡Ñ 91(H) ¡Ñ 291(D) mm, Approx. 2.2 kg |