User RAM 4 Mb
SPECIFICATION
· Built in4MB memory. Readsource ICto buffer via Master socket andthen read copy thedata inthe buffer area to2 ICs at thesame time.
· FLASH devices onlysuppor tedby copying data from one toanother.
· The besttools forQC &QA.
· Stand-Alone operation with 18-key keypads and 20x4 LCDdisplay.
· Less than 13 seconds takesto program 8Mb FLASHMemory.
· Just change adaptors to program differentICs orpackages devices.
· PC-Link programming & devices library updating via printer por t connect to PCor Notebook.
· Switching power100V~240V AC input.
· Build-in protection function forreliable andfast programming.
· Graphic display, easy programming operation.
· Suppor t low voltage devices.
· Auto-detect theIC insertion andPIN contact of FLASH& EPROMwith powerful graph showing the status ofdevices.
· Only needed 4 hot keys, ↓, ↑, ENTER& ESC, to program.
· Adjust programming parameters &Vcc, Vcc +/-5% or+/-10% verification voltage. Auto detect ICbrand &number ofFLASH &EPROM.
· Auto-setting programming circumstances and contents.
HARDWARE SPECIFICATION
User RAM 4 Mb
Keyboard: 18-key keypad
Display: 20 x 4 characters LCD
Output/Input: Parallel por t (printer por t)
Transmitted format: INTELHEX, Motorola HEX, TEK HEX, ASCII HEX, Binary, etc.
Dimension: 39.5cm X 14.5cm X 6.5cm
Weigjt: 3.0 Kgs
Temperature: +5°C to +45°C
Humidity: up to 90 % non-condensing
Altitude: up to 5000m
POWER
Voltage : 100VAC to 240 VAC
Frequency Range : 50 to 60Hz
Power Consumption : 45W maximum.
Standard Accessories
1. Mainunit x 1
2. UserManual x 1
3. General PC-Link S/W x 1
4. 25-pin printer cablex 1
5. Powercord x 1
Optional Modules
FLASH-16BIT(FBGA48)
FLASH-16BIT(EBGA64)
FLASH-16BIT(CSP88)
FLASH-16BIT(DIP40)
FLASH-16BIT(PLCC44)
FLASH-16BIT(PSOP44)
FLASH-16BIT(TSOP48)
FLASH-16BIT(TSOP56)
FLASH-8BIT(DIP32)
FLASH-8BIT(PLCC32)
FLASH-8BIT(PLCC32A)
FLASH-8BIT(TSOP40S)
FLASH-8BIT(TSOP40F)
FLASH-8BIT(PSOP44)