Adjustable Bench-Top Lathe & Milling: ALM-35526-400/ ALM-35526-550 |
Specifications
Cutting | |
Swing Over Bed | 250 mm |
Distance Between Centers | 400 mm (ALM-35526-400) |
550 mm (ALM-35526-550) | |
Hole through Spindle | 20 mm |
Spindle Taper | MT #3 |
Tailstock Taper | MT #2 |
Spindle Speed (6 steps) | 155 ~ 2000 rpm |
Output Power | 550 W |
Range of Threads | Metric: 0.4 ~ 3 mm (12 thread pitches) |
Imperial:10 ~ 44 TPI (8 thread pitches) | |
Net/Gross Weight | Model A: 110/130 kgs, Model B: 130/160 kgs |
Packing Size | Model A: 1130 x 730 x 610 mm |
Model B: 1230 x 730 x 610 mm | |
Milling/ Drilling | |
Drilling Capacity | 13 mm |
End Milling Capacity | 16 mm |
Face Milling Capacity | 30 mm |
Drilling/ Milling Spindle Taper | MT #3 |
Spindle Speed | Low Range: 0 ~ 1100 rpm |
High Range: 0 ~ 2500 rpm | |
Output Power | 350 W |
T-Slot | 12 mm |
Spindle Rotary Angle | -25º ~ +45º |
Net/ Gross Weight | 30/ 45 kgs |
Packing Size | 840 x 500 x 430 mm |
Standard Accessories
Ø 125 mm 3-jaw Chuck |
Ø 13 mm drill chuck with taper shank |
Dead Center MT #2, MT #3 |
Gear Set |
Mill Table |
Optional Accessories
Stand |
11-pc Cutter Set (10 x 10 m) |
Face Plate Ø 220 mm |
Rolling Center MT #2 |
4-jaw Chuck Ø 125 mm |
Quick Change Rest |
Tailstock Chuck Ø 13 mm + MT #2 |
Quick Vice 100 mm |
Mill Chuck Set |
End Mill |
Indexable Carbide End Mill |
42-pc Clamping Kit |
© Copyright 2000-2012 Sun Equipment Corporation. Prices and specifications are subject to change without notice
Order 1-800-870-1955 |