Features:

1. Understand pneumatic and electro-pneumatic elements
2. Understand principles of electro-pneumatic elements
3. Understand applications of electro-pneumatic elements
4. Learn how to layout electro-pneumatic elements and desin PLC program to control the system

Specifications:

Aluminum platform (23.5" x 29.5") with Pin-slot for easy pneumatic component installation

1. Three-point Assembly
(a) 4 mm snap-lock air tube connector
(b) A pressure gauge with a filter and pressure regulator
(c) Slide-lock connector attached on the bottom

2. Air Supply Block: 1 pc
(a) Slide-lock attached on the bottom
(b) a slide switch with a check valve
(c) 4 mm snap-lock air tube connector
(d) 9 air outlets

3. Single-Acting Cylinder 1 pc
(a) I.D.: 20 mm, Length: 100mm
(b) 4 mm snap-lock air tube connectors
(c) Magnet sensor device
(d) Slide-lock attached on the bottom
(e) Magnet Reed switch x 2
(f) Throttle Valve x 2

4. Double-Acting Cylinder: 3 pcs
(a) I.D.: 20 mm, Length: 100 mm
(b) 4 mm snap-lock air tube connectors
(c) Magnet sensor device
(d) Slide-lock device attached on the bottom
(e) Reed switch: 3 pcs
(f) Throttle Valve x 2

5. 5/2 Double-pilot Solenoid Valve: 3 pcs
(a) 4 mm snap-lock air tube connectors
(b) Slide-lock device attached on the bottom
(c) 24V DC

6. 5/2 Single-pilot Solenoid Valve: 3 pcs
(a) 4 mm snap-lock air tube connector
(b) Slide-lock device attached
(c) 24V DC
(d) Return spring mechanism

7. PU tubes: 25 pcs

8. 3-Way Air Tube Connectors: 15 pcs

9. Preessure Switch : 1 pc

10. Electro-pneumatic limit switch: 6 pcs

11. Reed Switch: 7 pcs

12. Power Supply: 1 pc

13. Mitsubishi FX2N PLC: 1 pc

14. Connection Wire with banana plugs 100 pcs

15. User's Manual: 1 pc
Covers the introduction to Electro-Pneumatic elements, PLC pneumatic sequence control, looping & layout?

Experiments:

1. Single-pilot solenoid valve loop- memory control
2. Single-pilot solenoid valve loop- one cycle
3. Single-pilot solenoid valve loop- continuously automatic reciprocating
4. Single-pilot solenoid valve loop- delay
5. Single-pilot solenoid valve loop- delay, continuously automatic reciprocating
6. Double-pilot solenoid valve, two buttons controlled loop
7. Double-pilot solenoid valve loop- limit switches, one cycle
8. Double-pilot solenoid valve loop- continuously automatic reciprocating
9. Double-pilot solenoid valve loop- delay
10. Double-pilot solenoid valve loop- one cycle
11. Double-pilot solenoid valve loop- delay, continuously automatic reciprocating
12. A single-pilot solenoid valve controls a double-acting cylinder in the sequence of A+B+A-B-C+C-
13. A single-pilot solenoid valve controls a double-acting cylinder in the sequence of A+A-B+B-C+C-
14. A double-pilot solenoid valve controls a double-acting cylinder in the sequence of A+A-B+B-C+C-
15. A single-pilot solenoid valve controls a double-acting cylinder- delay
16. A double-pilot solenoid valve controls a double-acting cylinder- delay
17. Sequence coltrolled loops with 3 cylinders and 3 single-pilot solenoid valves: A+A-B+C+B-C-
18. Sequence coltrolled loops with 3 cylinders and 3 single-pilot solenoid valves: A+B+C+C-B-A-
19. Applications of pressure switches

?Copyright 1995~2013 Sun Equipment Corporation. All rights reserved Prices and specs are subject to change without notice.